*****Please read****    
 
THIS IS FOR THE REAR 4 LINK MOUNT AND MOUNTING HARDWARE ONLY! Truck and other accessories not included.
 
NOT RECOMMENDED FOR FRONT AXLE MOUNT INSTALLATION!!! THAT WOULD REQUIRE THE USE OF THE PANHARD OR YOU WILL CREATE A BUMP STEER EFFECT WITH JUST A CMS.  THIS DEFEATS THE PURPOSE OF THE 4 LINK MOUNT. USE OUR FRONT 4 LINK SERVO MOUNTED AXLE MOUNT FOR PROPER INSTALLATION ON A FRONT AXLE.
 
NOTE:
 
1) DO NOT USE WITH A PANHARD LINK AS YOU WILL BE CREATING A 5 LINK AND CAN CAUSE BINDING IN YOUR SUSPENSION, LIMITING TRAVEL.
 
2) You will need another rear upper link to complete installation.
 
3) Link lengths can differ significantly as the lengths are determined by your suspension height/or lift. A good starting point is to use another rear upper 117mm length link from CEN Racing. You can use shorter or longer link ends for minor adjustments if it is close. Or you will need to make links if more adjustment is needed.
 
4) To install you will simply remove the rear panhard and mounts, use the included hardware and screw the 4 link to the axle housing existing holes that the 2.5mm screws run through for the stock upper link mount. Screw the top screw into the housing and bolt your links through the top uprights and secure
 
This listing is for 1- rear 4 link triangulated mount for the CEN F450 for truck. It is made from Taulman HT ALLOY 910! 
 
Package includes:
 
1 - Rear 4 link mount
 
7 - Pcs SS mounting hardware
 
1 - Small sticker sheet
 
Please let me know if you have any questions.